Selection Guide for Mainstream Bluetooth Module Chips for Lithium Battery BMS Protection Boards — Focusing on the KT6368A Dual-Mode Chip

 


1. Types of BMS Protection Board Products

Currently, many manufacturers produce BMS (Battery Management System) protection boards for lithium batteries, but only a few excel in quality. Insights from repair engineers on platforms like Bilibili provide authentic perspectives. Based on my observations, BMS protection boards generally fall into two categories:

Type 1: Integrated Battery & BMS Systems

  • Manufacturers combine lithium battery packs and BMS into a single product (e.g., for two-wheel or three-wheel electric vehicles).
  • Mass-produced and sold as finished battery products or battery boxes.

Type 2: Modular Battery Packs with External BMS

  • Sellers provide battery packs without built-in BMS (often lacking R&D capabilities or targeting repair shops/hobbyists).
  • Buyers pair these with external BMS boards and sell assembled battery systems to niche markets.

Key Takeaways:

  • Standard, high-volume applications typically develop proprietary BMS boards (rarely include Bluetooth).
  • Low-volume, fragmented markets often use externally sourced BMS boards (Bluetooth is a common feature).

Why Bluetooth Integration Matters:

  • Enables mobile app interaction for parameter monitoring/configuration.
  • Enhances user experience, reduces after-sales costs, and increases customer satisfaction.

This analysis aligns product development with customer needs and supports a SWOT evaluation of the KT6368A dual-mode Bluetooth chip. Understanding demand can reveal untapped product potential.

Typical BMS Protection Board Requirements:

  • Market prefers dual-mode chips for backward compatibility.
  • Consumers favor WeChat Mini Programs for ease of use.
  • Supported battery types: Ternary Lithium, LiFePO4 (LFP).
  • Balancing method: Active balancing.

2. Sample Bluetooth-Enabled BMS Boards Collected Online

文章内容

1.JDY-33-V1.6 – Bluetooth SPP transparent transmission module (datasheet available).

文章内容

2. D32 Dual-Mode Bluetooth Module – Supports UART transparent transmission, SPP 3.0 + BLE 4.2, HC-05/06 compatibility.

文章内容

Feiyitong-based Module (likely high-cost, from an official site).

文章内容

DX-BT24 Module – Another variant in use.

3. Conclusion

The KT6368A dual-mode Bluetooth chip offers distinct advantages for BMS lithium battery applications:

  • Compact size & cost-effectiveness make it a top contender.
  • SOP8 package simplifies integration.
  • Enables flexible module designs, reducing costs for manufacturers.

By adopting the KT6368A, companies can optimize BMS board designs while maintaining compatibility and affordability.

评论

发表评论

此博客中的热门博文

KT148A Voice Chip at Baidu Baike

图片
Voice Chip The KT148A Sound chip is developed by Shenzhen Qingyue Electronics Co., Ltd. and is widely used in security, transportation, and other fields. The KT148A is a 32-bit DSP voice chip in a standard SOP8 package. It features a built-in 420KByte voice storage space, supporting a maximum voice length of 420 seconds, multi-segment voice playback, direct driving of a 0.5W speaker, and user-replaceable voice content. Chinese Name: KT148A Sound Chip Developer: Shenzhen Qingyue Electronics Co., Ltd. Type: Voice Chip Applications: Security, transportation, and related fields 1. Product Overview The KT148A is a 32-bit DSP sound chip in a standard SOP8 package. It has a built-in 420KByte voice storage space, supporting up to 420 seconds of audio, multi-segment playback, direct driving of a 0.5W speaker, and allows users to replace voice content. 2. Product Advantages Cost Reduction & Reprogrammability: Improved manufacturing processes lower costs while allowing repeated firmware upd...
阅读全文

KT148A Voice Chip Issue: Difficult to Play with Code Sending - Normal Playback After Grounding Pin 4, What’s the Reason?

图片
Problem Description: Hello, we’ve encountered an issue and would appreciate your support: With the KT148A chip, after powering on, sending the code rarely triggers playback. However, if we use tweezers to briefly short Pin 4 (PB0) to ground and then send the code again, playback works normally. What could be causing this? Based on the observed behavior, it’s highly likely an issue with the timing of one-wire communication,  particularly with the start signal, which may be too short.  Let’s analyze this in detail and review the KT148A schematic as follows: 1. Pin 4 (PB0) of the Chip: PB0 is a test pin with the default factory function of triggering wake-up and playback when grounded. 2. Customer Description: When the customer uses tweezers to short PB0 (Pin 4) to ground, it follows this principle. The shorting action actually performs two operations: Action 1: The KT148A detects a falling edge signal, wakes up, exits low-power mode, and enters full-speed operation. Action 2: Th...
阅读全文

KT1025A Dual-Mode Bluetooth Audio Chip Layout Description and Design Precautions

图片
  1. Brief Overview 1. First, please refer to the provided BT201 test DEMO module as the standard. 2. If using the chip independently without testing the BT201 module and directly proceeding to layout, background noise is highly likely if experience is limited. Therefore, always compare with the manufacturer’s test board first. 3. The BT201 solution does not include FM functionality. Please note this. The FM circuit should be left floating without hesitation 2. Precautions 1. Background noise or interference is common in Bluetooth audio products. Do not be careless during layout. 2. If you have not worked on audio products before, study online resources thoroughly. Assuming things casually will naturally lead to noise issues. 3. The core principle is to separate analog ground and digital ground. If unclear, consult an experienced engineer. 4. Ensure a clean power supply. Use an LDO whenever possible instead of a DC-DC converter. 5. Bluetooth operates at high-frequency RF and radiat...
阅读全文