BLE Voice

1. Upgrade and Download Instructions Connect the chip’s USB port to a standard USB interface. The first pin is the chip’s power supply pin. 1.1. Upgrade Operations In most cases, when downloading a program to a development board or prototype, the regular upgrade method is used. In a few cases, certain chips require serial port upgrade (for example, AD15,KT6368A, KT148A, and etc.). 1.1.1. Regular Upgrade 1. DIP Switch Settings for the Forced Upgrade Tool Use the DIP switch settings shown in the table below to enter upgrade mode: Note: Only one DIP switch bit can be set at a time, and the Forced Upgrade Tool must be reconnected to the PC after each change. 2. Connecting the Chip and the Forced Upgrade Tool The USB female port of the tool connects to the PC. The USB male port connects to the prototype or development board.  ⚠️ Be careful not to reverse the connections (refer to the diagram). 3. Performing the Upgrade Download After Step 2: For “None” or “2” DIP settings → press...